Daytona Sensors WEGO III Dual Channel Wideband Oxygen Sensor Air Fuel Ratio

Daytona Sensors WEGO III Dual Channel Wideband Oxygen Sensor Air Fuel Ratio

***We are an Authorized Daytona Sensors Dealer ***

Brand new, includes: WEGO III dual display unit, two Bosch LSU 4.2 oxygen sensors, 96" sensor harness, two 18 x 1.5 mm weld nuts for exhaust pipes, and software on CDROM

• Daytona Sensors Dual Channel WEGO Dual Channel Wide-Band Air/Fuel Ratio (AFR) Display displays and logs two channels of air/fuel (AFR) data and includes an input for a customer supplied flex fuel (ethanol) sensor (sensor not included).
• Complete air/fuel ratio display system with built-in data logging.
• Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5V analog input for sensors such as throttle position or manifold pressure
• Can be used for on-road or dyno testing
• Suitable for automotive, motorcycle, and other small engine applications
• Measurement range is 10.3 to 19.5 gasoline AFR or 0.70 to 1.33 Lambda
• Highly accurate with less than ±0.10 AFR or ±0.007 Lambda error over entire range
• Easy free-air calibration procedure corrects for sensor aging effects
• Two 0-5V analog AFR outputs for interface to dyno instrumentation
• Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions
• Wide supply voltage range from 11-16V allows operation from battery on small engines or race vehicles without an alternator. Current draw is approx. 1 amp (2 amps for dual channel unit)
• Built-in USB interface
• Fully encapsulated with water-proof LED display
• Compact size: 5.6"L x 3.2"W x 0.9"H

Major WEGO Advantages over Competitive Systems:

• Data analysis. WEGO Log software allows you to analyze the data logged by the WEGO unit, not just print out a chart display. You can display and print out the required fuel correction (in percent) based on the AFR target value you select. You can then copy and paste this fuel correction data from the WEGO software to an Excel spreadsheet and then copy and paste from the Excel spreadsheet into your engine mapping software. No other system offers this capability.
  
• Easy sensor free-air calibration. All WEGO systems provide quick and easy at-a-glance verification and adjustment of the sensor free-air calibration. This allows the WEGO to maintain accuracy as the sensor ages and maximizes sensor life in racing applications where the sensor may be exposed to leaded fuels.
• Knowledgeable and prompt technical support from Daytona Sensors