Daytona Sensors 112001 WEGO III Wideband Oxygen Sensor Air Fuel Ratio Gauge Motorcycle
Daytona Sensors 112001 WEGO III Wideband Oxygen Sensor Air Fuel Ratio Gauge Motorcycle
Daytona Sensors 112001 WEGO III Wideband Oxygen Sensor Air Fuel Ratio Gauge Motorcycle
***We are an Authorized Daytona Sensors Dealer **This 112001 WEGO unit has a 42" harness length, plus 16" oxygen sensor harness, for a total length of 58". This length is designed for motorcycles, but the wideband will work on any gas engine. If you need a longer harness length please see our other listings for 112002.
The Daytona Sensors 112001 WEGO III Wideband Exhaust Gas Oxygen Sensor System is a third generation product that utilizes the proven Bosch LSU 4.2 wide-band exhaust gas oxygen sensor. This kit includes WEGO III unit with standard length harness for motorcycle applications, Bosch LSU 4.2 oxygen sensor, 18 x 1.5 mm weld nut for exhaust pipe and wiring connectors. By utilizing miniature surface mount electronics technology, digital signal processing techniques, and a switching power supply for the sensor heater, the WEGO III provides the same level accuracy as lab systems costing thousands of dollars.
Data Logging Software: the WEGO III features data logging and includes a built-in USB interface for easy connection to laptop computers (or PCs). This data logging capability greatly facilitates engine tuning and diagnosis of driveability issues. The WEGO III can store data for over 2 hours of operation.You can use our WEGO Log software to download and display this data on a chart recorder type screen. WEGO Log software runs under Windows. The software allows viewing AFR, engine RPM, and analog sensor data with user defined scaling. Data can also be analyzed to calculate required fuel correction tables with the same RPM rows and throttle position (TPS) columns used by Dynojet Power Commander (PC) systems. Correction values can then be copied and pasted into the PC software using provided Excel spreadsheets (refer to website for details). The most up-to-date version of the WEGO software is available for download from the Daytona Sensors website Tech Center at no charge - feel free to download and test drive the software before you make your purchase.
Available data includes AFR (air/fuel ratio), engine RPM, and a 0-5 Volt analog input. The RPM input can be connected to a tachometer signal or driven directly from an ignition coil. RPM data is correctly scaled and displayed for 1-12 cylinder engines. The analog input can be connected to sensors such as throttle position or manifold pressure. Analog data can be scaled to display the correct units, such as percent throttle position or In-Hg manifold pressure.
Complete air/fuel ratio metering system with built-in data logging:
- Versatile tuning aid for all carbureted and fuel injected engines displays air/fuel ratio (AFR) and logs over 2 hours data including AFR, engine RPM, and a spare 0-5 Volt analog input for sensors such as throttle position or manifold pressure
- Can be used for on-road or dyno testing
- Suitable for automotive, motorcycle, and other small engine applications
- Highly accurate with less than ±0.10 AFR error over 10.3-19.5 AFR range
- Easy free-air calibration for sensor aging effects
- 0-5 Volt analog AFR output for interface to dyno instrumentation
- Ultra-bright daylight readable blue LED display with automatic dimming under low light conditions
- Wide supply voltage range from 11-16 Volt allows operation from battery on small engines or race vehicles without an alternator
- Current draw is approximately 1 amp
- Built-in USB interface
- Fully encapsulated with water-proof LED display