Davies Craig 8907 EWP80 Remote Electric Water Pump Kit + LCD Controller 80LPM

The Davies Craig EWP80 Electric Water Pump and Electric Pump/Fan Digital Controller Combo (Part Number 8907) - is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat. The EWP80 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to three liters (183 cubic inches). The revolutionary, EWP80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and inco rporates a ceramic faced impeller seal for long-life durability.

Technical Specifications for Pump:Motor life

• Operating voltage: 3V DC to 15V DC
• Height: 87.5mm (3.31 inches)
• Width: 128mm (5.04 inches)
• Pump weight: 900 grams (2 lb)
• Maximum current: 7.5A
• Flow rate (max): 80 L/min (1270 US gal/hr) @ 13.5V DC
• Operating temperature: -40° to 130°C (-40° to 266°F)
• Pump design: Clockwise centrifugal
• Motor life: 6,000 hours with an EWP/Fan Digital Controller 3,000 hours continuous at 80°C (176°F) and 12V DC
• Pump material: Nylon 66, 30% glass-filled 
• Burst pressure: 350 kPa (50 psi)
• Seal: Ceramic face seal
• Inlet and outlet size: 38mm (1½”) - fits hose sizes: 38mm to 44mm / 1½” to 1¾” with included sleeve adapters
• The EWP80 is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not self-priming

• • The Davies Craig Digital Controller for Electric Water Pump & Fans  Part Number 8001 LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the Electric Water Pump (EWP) by varying the speed of the EWP in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60°C (140°F) to 100°C (212°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

    Features:

    • Black & White Numerical Screen

      • Plus 10°C (14°F) set/target temperature
      • Under temp 40°C after 5 mins
      • Temp sensor error
      • Over or under voltage
      • EWP error

      Kit Contents: EWP80 Water Pump, straight pump adapter (1), elbow pump adapter (1), Digital Controller, instructions, wiring harness, In-line adapter, sleeve rubber adapters (2), hose clamps (4), temperature sensor assembly, led with pigtail, hardware

      • Celsius or Fahrenheit display option
      • Warning Alarms:
      • Select any set temp range from 140°F / 60°C to 212°F / 100°C
      • Set / targeted temperature memory
      • Override feature to assist bleeding EWP & fail safe
      • Input voltage display