Davies Craig 8126 24 Volt EWP115 Remote Electric Water Pump Universal: PUMP ONLY

Davies Craig 8126 24 Volt EWP115 Universal Remote Electric Water Pump

IMPORTANT:

• This is the 24 volt version of the pump!  ***
• This Davies Craig 8126 is the pump only!
• No other components are included
• If you need a complete kit with installation components please purchase the Davies Craig 8026

The Davies Craig EWP115 Electric Water Pump is a revolutionary, Australian-designed water pump made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced impeller seal for long-life durability.

 Technical Specifications:

• Operating voltage: 20V DC to 27V DC
• Height: 84mm (3.31 inches)
• Width: 128mm (5.04 inches)
• Inlet Opening: 38mm (1.50 inches)
• Maximum current: 5.5A at 24 volts
• Flow rate (max): 115 L/min (1822 US gal/hr) @ 24V DC
• Operating temperature: -40° to 130°C (-40° to 266°F)
• Pump design: Clockwise centrifugal
• Pump weight: 980 grams (2.16 lb)
• Motor life: 3,000 hours continuous at 80°C (176°F) and 24V DC
• Pump material: Nylon 66, 30% glass-filled
• Burst pressure: 500 kPa (72.5 psi)
• Seal: Ceramic face seal
• Fits hose sizes 38mm to 51mm (1½” to 2”)
• The Electric Water Pump is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’.

Important: EWP115 pump only: no other items included, please see note above