Davies Craig 8040 EWP115 Remote Electric Water Pump

The Davies Craig EWP115 Aluminum Electric Water Pump (Part Number 8040) is a universal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump. By removing the parasitic power losses of a belt-driven water pump the electric water pump can provide extra power, increased torque, increased cooling capacity and eliminate heat soak. The revolutionary Davies, Craig EWP115 Electric Water Pump is now available in light weight aluminium! Designed with the high-performance pro, sprint, tarmac, circuit and drag racer in mind this rugged alloy electric water pump has 1” NPT internal threads at inlet and outlet for neat, tight, dash fitting applications. This essential performance accessory increases your vehicle’s engine power and helps eliminate engine heat soak.  The EWP115 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to seven litres (429 cubic inches). The revolutionary EWP115 is made from aluminum and incorporates a ceramic faced impellor seal for long-life durability. Options for pump control Use in conjunction with Electric Water Pump & Fan Digital Controller (not included, see our other kits).  The Digital Controller has a microprocesser which will run the EWP at exactly the right flow rate maintaining your set, targeted engine temperature. Use in conjunction with Thermal Switch (not included). Combine the EWP with an adjustable Thermal Switch to add a cooling boost to an overheating mechanical pump cooling system. Continuous Running Wire the pump to the ignition for maximum cooling – suitable for race vehicles, very hot climates and chronically overheating engines. Electric Water Pump Kits are supplied with everything you need for DIY installation, including easy-to-understand instructions.   Technical Specifications: Dimensions: Height: 84mm (3.31 inches) Width: 128mm (5.04 inches) Inlet Opening: 38mm (1.50 inches) Pump weight: 1200 grams (2.65 lb) Operating voltage: 3V DC to 15V DC Maximum current: 10A Flow rate (max): 115 L/min (1822 US gal/hr) @ 13V DC Operating temperature: -40° to 130°C (-40° to 266°F) Pump design: Clockwise centrifugal Motor life: 3,000 hours continuous at 80°C (176°F) and 12V DC; 7,000 hours with an EWP/Fan Digital Controller (not included) Pump material: aluminum Burst pressure: 500 kPa (72.5 psi) Seal: Ceramic face seal Fits hose sizes: 38mm to 51mm (1½” to 2”) Internal thread: inlet 1" NPT, outlet 1" NPT The EWP® is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’   Kit Contents: EWP115 Alloy Pump, Wiring harness, Sleeve 3mm rubber adaptors (2), Hose clamps (2), Assorted hardware bag: includes relay.