Davies Craig 8025 EWP115 Remote Electric Water Pump
$210.33
In stock
SKU
DVC8025
The Davies Craig EWP115 Electric Water Pump (Part Number 8025) is a universal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump.
The Davies Craig EWP115 Electric Water Pump (Part Number 8025) is a universal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump. By removing the parasitic power losses of a belt-driven water pump the EWP can provide extra power, increased torque, increased cooling capacity, eliminating heat soak and provide better engine temperature control.
Options for pump control
Use in conjunction with EWP/Fan Digital Controller (not included, see our other kits). The Digital Controller has a microprocesser which will run the EWP at exactly the right flow rate maintaining your set, targeted engine temperature.
Use in conjunction with Thermal Switch (not included). Combine the EWP with an adjustable Thermal Switch to add a cooling boost to an overheating mechanical pump cooling system.
Continuous Running Wire the pump to the ignition for maximum cooling – suitable for race vehicles, very hot climates and chronically overheating engines. Electric Water Pump Kits are supplied with everything you need for DIY installation, including easy-to-understand instructions.
Technical Specifications:
Dimensions:
Height: 84mm (3.31 inches)
Width: 128mm (5.04 inches)
Inlet Opening: 38mm (1.50 inches)
Operating voltage: 3V DC to 15V DC
Maximum current: 10A
Flow rate (max): 115 L/min (1822 US gal/hr) @ 13V DC
Operating temperature: -40° to 130°C (-40° to 266°F)
Pump design: Clockwise centrifugal
Motor life:
3,000 hours continuous at 80°C (176°F) and 12V DC;
7,000 hours with an EWP/Fan Digital Controller (not included)
Pump weight: 980 grams (2.16 lb)
Pump material: Nylon 66, 30% glass-filled
Burst pressure: 500 kPa (72.5 psi)
Seal: Ceramic face seal
Fits hose sizes 38mm to 51mm (1½” to 2”)
The EWP® is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’.
Kit Contents: EWP115 Pump, Wiring harness, Sleeve 3mm rubber adaptors (2), Hose clamps (2), Assorted hardware bag: includes relay.
Write Your Own Review