Davies Craig 8020 Electric Water Pump & Fan Controller

The Davies Craig Digital Electric Water Pump & Fan Digital Controller (Part Number 8020) – has two specific functions. This unique Digital Controller will manage the operation of a Davies Craig electric water pump by varying the speed of the pump in response to the coolant temperature and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers five target temperatures: 75°C, 80°C, 85°C, 90°C and 95°C (167°, 176°, 185°, 194° and 203°F). Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The Digital Controller will operate the engine’s electric fan automatically once the engine has reached 3°C (5.4°F) above the targeted (set) temperature. Another significant benefit is that the Controller allows the electric water pump to run on after ignition shutdown to eliminate heat soak.Technical Specifications for Pump / Fan Controller:Dimensions Length: 101mm (4 inches) Width: 95mm (3.74 inches) Depth: 35mm (1.38 inches) Weight 90 grams (3.2 oz)Input voltage: 12V DC to 15V DC Output voltage: 5V to 15V Maximum current: 12A Operating temperatures: -20° to 60°C (-5° to 140°F) Targeted (set) temperatures: 75°C, 80°C, 85°C, 90°C and 95°C (167°, 176°, 185°, 194° and 203°F) Fan cut-in temperature: 3°C (5.4°F) above the targeted (set) temperature Controller type: PCB with microprocessor Sensor type: Thermister in housing Time-out: 2 minutes maximum or set -5°C (23°F) Indicator LEDs: Temperature, power, pump, test, fanKit Contents: Digital Controller, instructions, wiring harness, In-line adapter, 3mm sleeve rubber adapters (2), hose clamps (2), thermal sensor, led with pigtail, assorted hardware