Davies Craig 8005 EWP80 Remote Electric Water Pump

  The Davies Craig EWP80 Electric Water Pump (Part Number 8005) – is a simple, do-it-yourself, easy to install, kit designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat. The revolutionary electric water pump is made from anti-corrosive, lightweight, glass-filled nylon & incorporates a carbon mechanical face seal for added reliability. The pump improves engine cooling control & capacity while giving you more power & improved fuel economy. The pump is universal & fits almost all makes of vehicles on the road today. Included in the kit is everything you need to fit it to your vehicle, including easy Do-It-Yourself instructions. Technical Specifications for Pump: Dimensions: Height: 87.5mm (3.31 inches) Width: 128mm (5.04 inches) Pump weight: 900 grams (2 lb) Operating voltage: 3V DC to 15V DC Maximum current: 7.5A Flow rate (max): 80 L/min (1270 US gal/hr) @ 13.5V DC Operating temperature: -40° to 130°C (-40° to 266°F) Pump design: Clockwise centrifugal Motor life: 3,000 hours continuous at 80°C (176°F) and 12V DC; 6,000 hours with an EWP/Fan Digital Controller (not included) Pump material: Nylon 66, 30% glass-filled Burst pressure: 350 kPa (50 psi) Seal: Ceramic face seal Fits hose sizes: 38mm to 51mm (1½” to 2”) The EWP® is a recirculating pump which is ideal for a ‘closed system’ similar to an automotive cooling system; it is not ‘self-priming’   Kit Contents: EWP80 Pump, instructions, wiring harness, straight adapter, elbow adapter, 2 O-rings, 3mm & 6mm sleeve rubber adapters (2 of each), hose clamps (2), assorted hardware bag & relay